7. To configure a call's advanced settings for a new dial string, access its advanced calling
options. From the Avaya XT Series web interface, select Make your Call > Advanced
Options > Direct Call. From the endpoint's main menu, select Call and select the down-
arrow to expand the call options.
Figure 22: Accessing advanced call options
Set the advanced parameters of your new dial string as follows:
Table 6: Entering advanced call properties
Field Name Description
Call Protocol If necessary, select the protocol to use when calling another
personal endpoint or meeting room:
• Select H.323 for H.323 endpoints, such as other Avaya XT
Series endpoints, or when joining a meeting hosted by the
Scopia Elite MCU or the Avaya Meetings Server Media
Server.
• Select SIP for SIP endpoints.
• Select ISDN to call ISDN endpoints. This requires an ISDN
gateway such as Avaya Equinox
®
Gatewayfor ISDN (see
Deployment Guide for Avaya XT Series).
Call Type Select whether the call is Audio-Video or Audio-Only.
Rate or Call Rate Select the bandwidth to be used when calling a remote
endpoint. Otherwise, the system uses the maximum available
bandwidth.
Your call is securely encrypted when it shows a padlock icon on the monitor. Ask your
system administrator to configure encryption (see Deployment Guide for Avaya XT Series).
Starting a Meeting
March 2021 User Guide for Avaya XT Series 57
Comments on this document? infodev@avaya.com
To Next Page
Loading...
