3. Select Program on the left
pane.
4. Select TV to search only for air
channels, CATV to scan for
cable channels, or All from
the Program List area.
5. Click New and the Program
List dialog box appears. Type
in the desirable name and
click OK.
6. Click Program Scan to start
the scanning process.
The application comes with a
default frequency table
therefore the application will
use this table to search for
active channels/programs. If
you want to terminate the
searching process, just
click Stop.
7. You can check the scanning
progress from the progress
bar. After scanning, the active
TV channels will be listed
inside the box. Click Apply to
save the scanned channels.
To Next Page
Loading...