IFD400 Series Pilot Guide
Aux Subsystem 4-19
If a step inadvertently has been checked off as accomplished, it
can be unchecked by selecting the step (touch it or use the
bottom right knob) and then touching it a second time or pushing
the knob to remove the checkmark. This will also toggle the
“Checklist Complete” text back to “Checklist Not Completed”.
Resetting Checklists
To quickly reset a completed or partially completed checklist,
press and hold the bottom right knob while that checklist is open.
All green completed checkmarks will be removed for that open
checklist.
To quickly reset all completed or partially completed checklists,
ensure the checklist directory (list of all checklists) is displayed
and then press and hold the bottom right knob to reset the
checklist and remove the gray or green checkmarks for that
checklist and jump the cursor down to the next partial or fully
completed checklist. At that point, press the knob again to clear
the next checklist and jump the cursor to the next one. Repeat
the process as needed until all checklists are reset.
TIPS AND TECHNIQUES
Backup Your Checklists
For a variety of reasons including copying onto other
IFDs, restoring post-service events, etc., Avidyne
highly recommends backing up and storing
electronic checklists by downloading checklists onto
USB fobs. Procedures are supplied later in this
manual.
To Next Page
