IFD400 Series Pilot Guide
2-26 FMS Subsystem
FLIGHT PLAN SEQUENCING
The FMS assumes that the pilot will fly the flight plan as defined.
If that does not occur, legs may not sequence as expected.
Therefore, to manually sequence the desired leg, select it by
either using the bottom knob or touch it and press the “Activate
Leg” LSK followed by accepting the confirm dialog box when it is
displayed. Doing so will turn that leg magenta, confirming that it is
now the active leg.
TIPS AND TECHNIQUES
Impending Turn Notification
If flying the defined flight plan, the IFD will provide a
message about an impending turn that includes the
upcoming desired track (DTK) and a 10 second (30
second if the required turn is more than 120
degrees) count down.
COOL FEATURE
The IFD is capable of generating an aural alert as
waypoints are sequenced. The aural alert can be
enabled or disabled using the Setup Page (see page
4-25).
To Next Page
Loading...
