IFD400 Series Pilot Guide
4-64 Aux Subsystem
The factory default setting is “Caution Terrain”.
Terrain Warning Aural
This setting controls the content of the aural message that is
generated during FLTA warning conditions, with selections as
follows:
Terrain Pull Up – the aural message will say “Terrain,
Pull Up; Terrain, Pull Up”
Terrain Terrain – the aural message will say “Terrain,
Terrain; Pull Up, Pull Up”
The factory default setting is “Terrain Pull Up”.
FLTA Exclusion Areas
This setting controls whether FLTA Exclusion areas around
airfields are enabled. The factory default setting is “On”.
If the FLTA setting is “Off”, this setting will not be shown.
To Next Page
Loading...
