IFD400 Series Pilot Guide
Aux Subsystem 4-73
applied, the list of presets will be dismissed and the normal Setup
Page contents will again be displayed.
To return to normal Setup Page operation without applying a
preset, press the “Exit” LSK.
IMPORTANT NOTE
When a preset is applied, it only affects settings for
the currently selected user profile. The user profile
name is not affected by applying the preset.
All Factory Settings
Applying the “All Factory Settings” preset item will cause all of the
settings on the Setup Page to be set to factory defaults, except
the “User Profile” and any network names and passwords.
Datablock Presets
Expanding the “Datablock Presets” item reveals several presets
that affect only the configuration of datablocks.
Datablock presets (expanded)
Left Side Factory Settings
The “left side factory settings” preset returns only the datablocks
on the left side to the factory defaults, as follows:
To Next Page
Loading...
