IFD400 Series Pilot Guide
Aux Subsystem 4-79
If the fuel flow system is not capable of reporting the amount of
fuel remaining (i.e. does not have a totalizer), then the IFD will
present two controls allowing the fuel quantity to be manually
adjusted.
Fuel Added – use this control to increment the fuel
quantity by an amount that was added since the last
flight.
Total – use this control to set the total quantity of usable
fuel on board.
When one of the controls is used, the value in the other control
will be adjusted accordingly. For instance, if the “Total” control is
showing 50 gallons and then “30” is entered using the “Fuel
Added” control, the total will be updated to show 80.
To Next Page
Loading...
