IFD400 Series Pilot Guide
6-18 General
Use bottom LSK on FPL tab before A/P
APR
Applicable only when GPS Select is set to “Prompt” in
Maintenance Mode. Indicates that the FMS is ready to
provide approach guidance for the autopilot. The proper
action is to press the “Enable A/P Approach” LSK on the
FPL page, then put the autopilot into approach mode.
The hold is armed for exit and is set to sequence upon
crossing the hold fix.
Exiting Hold At Intercept
The active HF leg (hold in lieu of procedure turn) is armed
for exit and set to sequence at the completion of the
inbound turn.
Disabled in Setup Options
FLTA has been turned off via the Setup page or via external
TERR INHB discrete input.
Invalid GPS Position/Velocity
FLTA is inhibited due to invalid GPS data.
<app> Function is not responding
The <app> software application (e.g. Datalink) within the
IFD has stopped working. If the problem persists, contact a
local dealer for service.
Exiting Hold
At Intercept
To Next Page
Loading...
