As soon as an entry for a device is included in the table, you can con-
figure various properties, for instance, port sharing. The type of con-
nection is not listed in the table until the device is physically connected
with the FRITZ!Box.
Example
The Add Device function is useful for vendors. When a customer or-
ders a new FRITZ!Box, they can have the vendor set up the network in
the FRITZ!Box. With the Add Device function this can be done without
actually connecting any network devices.
Removing Devices
Unused connections can be removed individually or all at once, as long
as they do not have any special settings. When a single unused connec-
tion is removed, all of the settings configured for this device are also
deleted.
A click on the Remove button removes all inactive connections for
which properties were never assigned. This function is useful in the
following situations:
• in environments with walk-in customers (for example, hotels, cafés,
betting offices)
• in households with children who often invite their friends to use the
Wi-Fi
FRITZ!Box 7590 AX 147
User Interface: Home Network Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
To Next Page
Loading...
Need help?
General
Weight and Dimensions
