Ayecka SR1 - RX Channel Switching

To Next Page

To Previous Page

Advanced DVB-S2 Receiver Operational Manual

SR1 Specifications

7.4.4 RX Channel Switching

The RX Channel Switching menu configures if changing RX will be automatic (in round robin

fashion) or active RX will not change.

Note:

The RX Channel Switching menu is disabled when the Rx Channel operation mode is

configured to Dual Mode in the previous section.

To define the RX channel switching mode:

 From the Configuration menu, select 4. Rx Channel Switching. The RX Channel Mode window

is displayed:

RX Channel Switch Configuration Management

==================================

1. RX Channel Switch Mode Auto

2. RX Channel Switch Period 20 sec

 Select the required option as follows:

 Rx Channel Switch Mode: Select this option to define the Rx Channel Switch

Mode

 Rx Channel Switch Period: Select this option to define the Rx Channel Switch

period.