Advanced DVB-S2 Receiver Operational Manual
SR1 Specifications
47
8.12
SR1 indicates serial number 987654321
The meaning is that the SR1 software cannot read the serial number from the on board Flash
memory. This may be caused by power fluctuation during cold reset or save of factory defaults.
Contact Ayecka support
8.13
TFTP fails when Telnet session is active
TFTP and telnet sessions cannot run concurrently.
You can use Telnet to start the TFTP, disconnect form telnet and reconnect when TFTP server
indicates that file transmission is completed.
An alternative is to start the Telnet from SNMP or serial
To Next Page
Loading...