Ayecka SR1 - System Maintenance Options; Telnet Settings; Network Management Settings

Advanced DVB-S2 Receiver Operational Manual
SR1 Specifications
37
The System menu includes the following:
7.7.1 Warm reset
The Warm reset restarts the controller without reloading the FPGA or resetting the internal
switch
7.7.2 Cold reset
The Cold reset restarts the controller, reloads the FPGA and restarts the internal switch.
7.7.3 Restore factory Defaults
The Restore Factory Defaults and Reset configures the SR1 to the values set in production,
deleting all configurations performed later.
7.7.4 Telnet
All Telnet relates settings including the password and timeout.
7.7.4.1 Username
The User Name menu sets the user name for Telnet.
7.7.4.2 Password
The Password menu sets the user name for Telnet.
7.7.4.3 Timeout
The timeout for Telnet to disconnect in absence of activity.
7.7.5 NTP Server IP Address
The NTP Server IP Address menu sets the NTP IP address.
7.7.6 SNMP Trap Server IP Address
The SNMP Trap Server IP Address menu sets the SNMP Trap server IP address.
7.7.7 SNMP Read Community
The SNMP Read Community menu sets the SNMP Read Community string.
7.7.8 SNMP Write Community
The SNMP Write Community menu sets the SNMP Write Community string.