Ayecka SR1 - Events Configuration Menu; FPGA Upgrade Menu; Show Installed FPGA Versions

To Next Page

To Previous Page

Advanced DVB-S2 Receiver Operational Manual

SR1 Specifications

7.7.9 Events Configuration menu

The Events Configuration menu enables selecting different types of event reports.

Events

======

1. System Response Configuration

7.7.9.1 System Response Configuration

Events Responses

================

1. Console No

2. SNMP Trap Yes

The System Response Configuration menu includes the following:

 Console: Determines whether to send system event responses to the console

 SNMP Trap: Determine whether to send SNMP traps. Select No to disable all traps.

7.7.10 FPGA Upgrade Menu

To view the FPGA upgrade menu select C from the system.

FPGA Upgrade

============

1. TFTP Server IP Address: 10.0.0.85

2. Filename: SR1_FPGA.afp

3. Show installed versions

4. Start the upload procedure

For further information refer to Chapter 11: SR1 Software and Firmware Upgrade

procedure

7.7.10.1 Show Installed Versions Menu

Selecting Show Installed Versions displays the FPGA versions menu which enables

viewing the images stored in the SR1 nonvolatile RAM.

FPGA Versions:

==============

Index Version Image Size Valid Active

1. 6.6b6 245027 Yes No