6. Wait for the write process to complete.
7.
Reset the System.
To
import
data from an SC-XM2/3 drive:
1. Insert the SC-XM2/3 drive into the Safety Controller.
2. From the System Menu, select Configuration Mode.
3.
Enter the password.
4. Hold OK until the Configuration Mode menu appears.
5.
Select Import from XM:
• For configuration
only, select Configuration
• For network settings only, select Network Settings
• For configuration and network settings, select Configuration/Network
• For all data, which includes configuration, network settings, and user passwords, select Config/Network/
Passwords
6. Wait for the import process to complete.
7.
Reset the System.
XS/SC26-2 and SC10-2 Safety Controllers
124 www.bannerengineering.com - Tel: + 1 888 373 6767
To Next Page
Loading...
Need help?
General
