Banner SC10-2roe - Page 85

The Manual Reset input device can be configured for one of two types of reset signals:
Monitored & Non-Monitored
Manual Reset Input
Monitored Reset
>.5s time < 2s
Non-Monitored Reset
Monitored Reset
Non-Monitored
Reset
M0:ES1
M0:MR1 Monitored
M0:SO1
M0:ES1
M0:MR1 Non-Monitored
M0:SO1
Figure 64. Timing Diagram—Latch Reset Block, Monitored/Non-Monitored Reset
XS/SC26-2 and SC10-2 Safety Controllers
www.bannerengineering.com - Tel: + 1 888 373 6767 85