R5917517 /00 ClickShare CB Core, CB Pro84
• Standby mode (deep sleep mode)
The Base Unit will only wake up when the standby button on the Base Unit is pressed.
Image 5–51 Example energy savers setting
How to set auto standby
Changes after how many minutes of being idle, that the Base Unit goes into the selected standby mode.
Select the desired time interval by clicking and dragging the red dot after “Standby after (minutes)” over the
line until it is close to the desired number of minutes.
5.9.3 Buttons
About Buttons
An overview of all currently paired Buttons and their details are shown. It is possible to see the connections
made to the Base Unit itself or the network in case of dedicated network mode.
ClickShare configurator
To Next Page
Loading...
Need help?
General