Barco ClickShare CB Core Installation Manual

9R5917517 /00 ClickShare CB Core, CB Pro
1.2 Installation requirements
Ambient temperature conditions
Max. ambient temperature : +40°C or 104°F
Min. ambient temperature: +0°C or 32°F
Storage temperature: -10°C to +60°C (14°F to 140°F)
Humidity conditions
Storage: 0 to 90% relative humidity, non-condensing
Operation: 0 to 85% relative humidity, non-condensing
Environment condition check
For installations in environments where the ClickShare is subject to excessive dust, it is required to have this
dust removed prior to it reaching the ClickShare’s air intake. Devices or structures to extract or shield
excessive dust away from the ClickShare are recommended. If this is not a feasible solution, then the
ClickShare must be relocated to a clean air environment.
It is the customer's responsibility to ensure that the ClickShare is protected from the harmful effects of hostile
airborne particles at all times. Barco reserves the right to refuse warranty or warranty exchange if a ClickShare
has been subject to negligence, abandon or improper use.
The ClickShare product is intended to be used in office and indoor environments only.
Maximum allowed altitude to use the product : 3000m (9843Ft). Due to China regulation the maximum altitude
is limited to 2000 meter (6561 feet) for China mainland.
Getting started

Barco ClickShare CB Core Specifications

General

Brand	Barco
Model	ClickShare CB Core
Category	DVD Player
Language	English