Barco ClickShare CB Core Installation Manual

35R5917517 /00 ClickShare CB Core, CB Pro
For more information about the ClickShare app, refer to the user guide.
4. Enter the passcode that is shown on the display
Image 4–23 Example of passcode prompt in the app
If the passcode disappeared too quickly, click “Try Again” in the app.
5. Select the desired screen or window and start sharing.
4.5.2 The ClickShare configuration wizard
About the configurator
The configurator is the internal web application that controls the settings and general setup of the connected
ClickShare. Allowing for the modification and (de)activation of the various ClickShare features.
These settings can be modified after the setup has been completed!
Initial setup of the configurator
1. Connect to the Base Unit:
► Through a direct LAN connection.
► By navigating to its wired IP address. For more information, see “Connecting over LAN”, page 30
► By connecting to its Wi-Fi network. For more information, see “Connecting over Wi-Fi”, page 31
2. Navigate to the configuration page through a browser of choice.
Note: The default IP address of the configurator is: “192.168.2.1”.
Note: Depending on the configuration of the browser, a security warning could be displayed. To
prevent this warning in the future, see “HTTP encryption”, page 80.
The ClickShare configurator login page is shown.
3. Log into the configurator.
Installing CB Core, CB Pro

Barco ClickShare CB Core Specifications

General

Brand	Barco
Model	ClickShare CB Core
Category	DVD Player
Language	English