Basler pilot - Mechanical Specifications; Standard Housing; Camera Dimensions and Mounting Points

Specifications, Requirements, and Precautions
14 Basler pilot
1.5 Mechanical Specifications
1.5.1 Standard Housing
The camera housing conforms to protection class IP30 provided the lens mount is covered by a lens
or by the cap that is shipped with the camera.
1.5.1.1 Camera Dimensions and Mounting Points
The cameras are manufactured with high precision. Planar, parallel, and angular sides guarantee
precise mounting with high repeatability.
The camera’s dimensions in millimeters are as shown in the drawings below.
Camera housings are equipped with four mounting holes on the top and four mounting holes on the
bottom as shown in the drawings.