Basler pilot - Revision History

Revision History
Basler pilot 229
Revision History
Doc. ID Number Date Changes
AW00015101000 9 Feb 2007 Preliminary version of the document.
AW00015102000 22 Feb 2007 Updated the camera weight and operating temperatur range. This is still a
preliminary version.
AW00015103000 24 May 2007 First release covering production cameras.
AW00015104000 8 June 2007 Modified Section 2 for the installation of the Basler pylon software, version
1.0.
AW00015105000 19 July 2007 Integrated the Kodak KAI-2093 sensor.
Minor corrections throughout the manual.
Added information on IP30 in Section 1.2.
Added warning not to remove the serial number in Section 1.9.
Updated times in Section 7.7.3.
Removed note on scA750-60 output in Sections 9.2.4, 9.2.5, 9.3.8, 9.3.9,
and 9.3.10.
Modified the Max Gain Raw Tap 1 and Max Gain Raw Tap 2 settings for the
piA640-210 and the piA1000-48 in Section 11.1.
Added binning information for the piA1600-35gm in Section 11.7.
AW00015106000 20 Sept 2007 Integrated the Sony ICX625 sensor.
Minor modifications and corrections throughout the manual.
AW00015107000 17 Oct 2007 Corrected the Bayer filter alignment for the piA2400-12 (in Sections 1.2,
9.2, and 9.3.1; added Sections 9.3.3, 9.3.5, and 9.3.7).
AW00015108000 5 Dec 2007 Changed the camera’s family name to "pilot".
Modified the exposure start delay in Section 8.8 and the constants for the
max. frame rate formulas in Section 8.9 for the piA2400-12.
AW00015109000 21 Dec 2007 Added guidelines for avoiding EMI and ESD problems in Section 2.3.1 on
page 40.
Removed web link for further information on APIPA in Section 5.3 on
page 69.
Corrected the voltage ranges relating to logic 0 and logic 1 in Section 7.7.1
on page 70.
Added references to Application Notes AW000565xx000 in Section 8.3.1
on page 85 and Section 8.5.1 on page 95.
Added binning information for the piA1000-48gm in Section 11.7.
Added the Gamma feature in Section 11.11 on page 179.
Added the Disable Parameter Limits feature in Section 11.13 on page 194.
Added the Debouncer feature in Section 11.14 on page 195.
Minor corrections throughout the manual.