Revision History
230 Basler pilot
AW00015111000 15 Feb 2008 Added a note on the sensor characteristics of the piA1900-32gm/gc in
Section 1.2 on page 2.
Included the "Software Licensing Information" section on page 22.
Moved the guidelines for avoiding EMI and ESD problems to Section 1.7 on
page 23.
Included the warning related to code snippets in Section 1.9 on page 25.
Transferred to following sections to the "Installation and Setup Guide for
Cameras Used with Basler’s pylon API": "Software and Hardware
Installation", "Network Recommendations", and "Camera and Network
Adapter IP Configuration".
Added the reference to the "Installation and Setup Guide for Cameras Used
with Basler’s pylon API" in Section 2 on page 27.
Added the "Improve the Network Performance" step in Section 5.2.1 on
page 51.
Corrected the minimum value for the Timer Delay Raw parameter and
indicated the minimum value for the Timer Delay Time Base Abs parameter
in Section 10.2.4.2 on page 143.
Minor modifications and corrections throughout the manual.
AW00015112000 5 Mar 2008 Modified mechanical drawings in Section 1.5.1.1 on page 14 and
Section 1.5.2 on page 17 (dimensions, holes for screw-lock connector).
Added information on the input line transition threshold in Table 5 on
page 62.
Added the maximum exposure times and related settings in Section 8.4.1
on page 92.
Minor modifications and corrections throughout the manual.
Doc. ID Number Date Changes
To Next Page
Loading...
