Revision History
Basler pilot 231
AW00015113000 18 Jul 2008 Expanded the voltage information in Section 1.2 on page 2.
Updated the distances and related tolerances between the front of the lens
mount and the sensor’s photosensitive area in Figure 11 on page 15 and
Figure 12 on page 16.
Added Information about mechanical stress test results in Section 1.5.4 on
page 21.
Added Information about the lens to which the mechanical stress tests
apply in Section 1.5.4 on page 21.
Modified the voltage information in Section 1.9 on page 25.
Removed voltage information from Table 5 in Section 7.2.1 on page 62.
Added Section 7.4.3 on page 67 and notes in Section 7.4.2 on page 65,
introducing the PLC cable.
Included detailed voltage information in Section 7.5 on page 68,
Section 7.7.1.1 on page 70, and Section 7.7.2.1 on page 73.
Modified the absolute maximum rating to +30.0 VDC in Section 7.7.1.2 on
page 72 and Section 7.7.2.2 on page 73.
Added a note relating to the debouncer in Section 8.8 on page 99.
Renamed Section 11 on page 149 the Features section and included the
contents of the former Chunk Features section.
Corrected the minimum value for the white balance ratio in Section 11.3 on
page 155.
Added Section 11.9 on page 173 introducing the averaging feature.
Corrected the name of the Gamma parameter in Section 11.11 on
page 179. (The Gamma parameter was incorrectly referred to as the
Gamma Raw parameter.)
Included the "Auto Functions" section on page 180 and added related
information in other parts of the manual.
Extended the description of the debouncer in Section 11.14 on page 195.
Minor modifications and corrections throughout the manual.
AW00015114000 22 Aug 2008 Updated contact addresses and phone numbers.
Official release of the averaging feature and of the auto functions.
AW00015115000 30 Sep 2008 Added information for the new piA2400-17gm/gc models.
Doc. ID Number Date Changes
To Next Page
Loading...
