Physical Interface
64 Basler pilot
7.3 Connector Types
7.3.1 8-pin RJ-45 Jack
The 8-pin jack for the camera’s Ethernet connection is a standard RJ-45 connector.
The recommended mating connector is any standard 8-pin RJ-45 plug.
Green and Yellow LEDs
This RJ-45 jack on the camera includes a green LED and a yellow LED. When the green LED is lit,
it indicates that an active network connection is available. When the yellow LED is lit, it indicates
that data is being transmitted via the network connection.
7.3.2 12-pin Connector
The 12-pin connector on the camera is a Hirose micro receptacle (part number HR10A-10R-12P)
or the equivalent.
The recommended mating connector is the Hirose micro plug (part number HR10A-10P-12S) or the
equivalent.
To Next Page
Loading...
