Tools for Changing Camera Parameters
Basler pilot 29
3 Tools for Changing Camera
Parameters
This section explains the options available for changing the camera’s parameters. The available
options let you change parameters either by using stand-alone tools that access the camera via a
GUI or by accessing the camera from within your software application.
3.1 The pylon Viewer
The Basler pylon Viewer is a standalone application that lets you view and change most of the
camera’s parameter settings via a GUI based interface. The viewer also lets you acquire images,
display them, and save them. Using the pylon Viewer software is a very convenient way to get your
camera up and running quickly when you are doing your initial camera evaluation or doing a camera
design-in for a new project.
The pylon Viewer is included in Basler’s pylon Driver Package. You can download the pylon
package from the Basler website: www.baslerweb.com/beitraege/beitrag_en_71708.html.
For more information about using the viewer, see the installation and Setup Guide for Cameras
Used with Basler’s pylon API, (AW000611xx000). You can download the guide from the Basler
website: www.baslerweb.com/indizes/download_index_en_19627.html.
3.2 The IP Configuration Tool
The Basler IP Configuration Tool is a standalone application that lets you change the IP
configuration of the camera via a GUI. The tool will detect all Basler GigE cameras attached to your
network and let you make changes to a selected camera.
The IP Configuration Tool is included in Basler’s pylon Driver Package. You can download the pylon
package from the Basler website: www.baslerweb.com/beitraege/beitrag_en_71708.html.
For more information about using IP Configuration Tool, see the installation and Setup Guide for
Cameras Used with Basler’s pylon API, (AW000611xx000). You can download the guide from the
Basler website: www.baslerweb.com/indizes/download_index_en_19627.html.
To Next Page
Loading...
Need help?
General
