BG 25 / 2011 / 2254_BG25_en_0000498763_V01
Attach the upper crowd rope, ensuring you wind it round the number of times re-
quired for safety purposes, to the drum (in the direction of travel - towards the right)
and thread the end of the rope through the clamping rail (11) on the winch (1).
BV00004024.jpg
Danger of rope breaking!
The end of the rope must not protrude past the drum winch, as it can
otherwise get caught on the winch trestle during winding.
Insert the wedge (21) into the clamping rail (11) and tighten the bolts (20) to the pre-
scribed tightening torque.
Feed the rope beneath the hose guide wheel (6).
Feed the rope over the left rope sheave (9) at the top of the mast.
Feed the rope over the rope sheave (10) on the crowd sledge.
Feed the rope over the right rope sheave (8) at the top of the mast.
To Next Page
Loading...
