K1 - 9
Safety Signs
Warning: Dangerous voltage
(e. g. electrical connector boxes, control boxes/
control cabinets of machine control systems)
Safety Signs / Warning Signs
In order to ensure maximum safety the machine / system is provided with safety
signs. Safety signs are either standardized safety signs warning of risks or
danger, or warning signs alerting the operating or service staff of
- any forbidden actions at the machine / system,
and/or
- informing about any load limits, such as the max. carrying capacity of the
machine and/or its load carrying unit.
Safety signs must be durable and have to be kept in a perfectly visible condition.
Warning signs ought to be visible in good time even from a great distance.
The machine /system may be provided with the following safety or warning
signs on various components of the machine:
To Next Page
Loading...