Baumuller b maXX 1000 - Page 101

Parameter
Parameter manual b maXX
®
1000
Document no. 5.07004.03
101
of 208
4
P1144
For further information see ZP1139– and ZFigure 48– on page 100.
P1145
For further information see ZP1139– and ZFigure 48– on page 100.
P1146
For further information see ZP1139– and ZFigure 48– on page 100.
P1147
For further information see ZP1139– and ZFigure 48– on page 100.
P1148
This parameter selects the target of the analog input function.
P1144
Minimaler ACI2 Strom 0.0 to 20.0 mA
EE Minimum ACI2 current 4.0 mA
STOP BM_u_MinimumACI2Current 10:1
P1145
Minimale ACI2 Frequenz 0.0 to 100.0 %
EE Minimum ACI2 frequency 0.0 %
STOP BM_u_MinimumACI2Frequency 10:1
P1146
Maximaler ACI2 Strom 0.0 to 20.0 mA
EE Maximum ACI2 current 4.0 mA
STOP BM_u_MaximumACI2Current 10:1
P1147
Maximale ACI2 Frequenz 0.0 to 100.0 %
EE Maximum ACI2 frequency 0.0 %
STOP BM_u_MaximumACI2Frequency 10:1
P1148
AI2 Funktionsauswahl 0 to 5
EE AI2 function selection 0
STOP BM_u_AI2FunctionSelection 1:1 -
Value Meaning
0 Disable
1 First frequency source
2 Second frequency source
3 PID set point (PID enable)
4 PID positive feedback
5 PID negative feedback