Baumuller b maXX 1000

To Next Page

To Previous Page

Parameter

Parameter manual b maXX

1000

Document no. 5.07004.03

of 208

P1139

Please note the ACI/AVI switch on the option card.

This parameter selects between ACI2 and AVI3.

Please note the ACI2/AVI3 switch on the option card.

Switch to ACI for 4 to 20 mA analog current signal (ACI) (ZP1139– should be set to 0)

and AVI for analog voltage signal (AVI2) (ZP1139– should be set to 1).

Besides parameter settings, the voltage/current mode should be used with the switch.

Figure 47: Voltage/current mode setting

For further information see ZFigure 48– on page 100.

P1139

ACI2/AVI3 Auswahl für AI1 0 to 1

EE ACI2/AVI3 selection for AI1 terminal mode 0

STOP BM_u_AI1modeACI2AVI3Selection 1:1

Value Meaning

0 ACI2: Current mode (0.0 to 20.0 mA)

1 AVI3: Voltage mode (0.0 to 10.0 V)

Baumuller b maXX 1000 - Page 99