Baumuller b maXX BM4-O-CAN-03 - Storage Conditions; Recommissioning

Demounting, Storage
Instruction handbook CANopen slave BM4-O-CAN-03
Document no. 5.02014.06
53
of 68
11
The device now can be switched on again. In case you want to dispose the option module
CANopen slave, you will receive further information in
ZDisposal– from page 55.
11.4 Storage conditions
Store the option module CANopen slave in a suitable packing and at the in the ZTech-
nical data– from page 61 specified storage conditions.
11.5 Recommissioning
In case you would like to take the option module CANopen slave in operation again, refer
to the specifications under „Storage conditions“. Then again run a commissioning, see
ZCommissioning– from page 31.