39
of 68
Instruction handbook CANopen slave BM4-O-CAN-03
Document no. 5.02014.06
8ERROR DETECTION AND TROUBLE
SHOOTING
In this chapter we describe the error displays on the basic device b maXX 4400. We explain the
meaning of every error display and of every error message and how you can react to these.
8.1 Safety instructions
h refer to ZBasic Safety Instructions– from page 9.
8.2 Requirements to the executing personnel
The personnel, who works with the b maXX-device, must be introduced in the safety instructions
and in the operation of the device and must be familiar with the accurate operating of the device.
Especially the reaction to failure indications and -conditions requires special knowledge, which
the operator must have. In the following we will inform you about the different faults and the con
-
sequential error messages.
To Next Page
Loading...
Need help?
General
