Requirements to the executing personnel
Instruction handbook CANopen slave BM4-O-CAN-03
Document no. 5.02014.06 Baumüller Nürnberg GmbH
56
of 68
12.2
12.2 Requirements to the executing personnel
The personnel which you instruct to dispose/demount the device must have the knowl-
edge and training to carry out these works properly. The personnel is to be chose in such
a way, that the safety instructions on the device and its parts is understood and referred
to by the personnel.
12.3 Disposal instructions
Preconditions m The option module CANopen slave has already properly been demounted.
m All technical appliances are prepared and are in a faultlessly condition.
Sheet steel The front panel is made of galvanized sheet steel. Sheet steel must be given to the iron
metal recycling.
Electronic scrap The electronic scrap from PCBs, which no further can be demounted, must be recycled
as special waste. Thereby refer to the relevant instructions.
12.4 Recycling plants/offices
Assure, that the disposal is carried out according to your company´s regulations and the
regulations of the disposal companies and official administrations. In case of doubt, con
-
tact the local business administration, which is responsible for your company or the envi-
ronmental office.
To Next Page
Loading...
Need help?
General
