Obligatory and liability
Instruction handbook CANopen slave BM4-O-CAN-03
Document no. 5.02014.06 Baumüller Nürnberg GmbH
16
of 68
2.8
2.8 Obligatory and liability
To be able to work as safe as possible with this CANopen slave module, you must know
and follow the hazard notes as well as the safety instructions of this documentation.
2.8.1 Follow the hazard notes and the safety instructions
In this operating instruction we use optical uniform safety instructions, which should save
you from personal injury and damage to property.
.
All persons, who work on and with devices of the series b maXX, must have this manual at
their workings availably and must follow the instructions and notes contained in this - espe-
cially the safety instructions.
Furthermore all persons, who work with this device must additionally know and regard all reg-
ulations and instructions, that are valid at the location.
2.8.2 Hazards when handling this module
The CANopen slave option module was developed and manufactured according to the
state-of-the-art technology and in compliance with the valid regulations and standards.
Nevertheless hazards can arise when using it. An overview of possible hazards are to be
found in chapter ZBasic Safety Instructions– fr
om page 9 and in ZFigure 3– on page 23.
We warn you against the acute hazard at the
respective places in this documentation.
2.8.3 Warranty and liability
All information given in this documentation is a not binding information for the customer.
It is subject to a steady further development and it is constantly updated.
Warranty- and liability claims against the c
ompany Baumüller Nürnberg GmbH are ex-
cluded, if particularly one or mo
re of the from us described ZFaulty usage– on page 14
or as stated below causes have/had affected the damage:
m Ent
ry of a catastrophe caused by foreign particles or by act of nature beyond control
To Next Page
Loading...
Need help?
General
