Requirements to the executing personnel
Instruction handbook CANopen slave BM4-O-CAN-03
Document no. 5.02014.06 Baumüller Nürnberg GmbH
26
of 68
5.2
5.2 Requirements to the executing personnel
DANGER
The following w
ill occur, if you do not observe this danger information:
m s
erious personnel injury m death
The hazard is: El
ectricity. Device and environment in the switching cabinet can carry perilous
voltages.
Before you start working, please assur
e that the device and the environment are off-circuit.
Pay attention to the relevant safety
instructions when using mains voltage leading devices.
Assure, that only qualified personnel mount and install this plug-in module.
Qualified personnel are, from the company Baumüller Nürnberg GmbH authorized elec-
tronic engineers and skilled persons of the customer or of third persons, w
ho have
learned the installation and commissioning of Baumüller drive systems and who are au-
thorized to put circuits and devices into operatio
n according to the standards of the safety
technology, to ground and to label.
Qualified personnel has a training or an instruction due to the local valid norms of the
sa
fety technique in maintenance and usage of an adequate safety equipment.
5.3 Preparation.
h assure yourself by means of the module identification (see „D“ in ZFigure 5–), that you
keep the right plug-in module ready.
Figure 5: Option module CANopen slave
To Next Page
Loading...
Need help?
General
