Baumuller b maXX BM4-O-CAN-03 - 3 Packing and Transportation; Transportation; Unpacking

17
of 68
Instruction handbook CANopen slave BM4-O-CAN-03
Document no. 5.02014.06
3PACKING AND TRANSPORTATION
Before shipment we have packed every Baumüller plug-in module in such a way, that a
damage during transportation is nearly impossible.
3.1 Transportation
The plug-in modules are packed according to the order in the manufacturing company.
h avoid strong transportation vibration
s and severe hits (max. 1 g).
h avoid statical discharges on
the electronic parts of the plug-in modules.
h don´t take the plug-in module out of the prote
cting packing until shortly before you want
to mount it.
3.2 Unpacking
After receipt of the plug-in module, which is still packed:
h check, if transportation damages ar
e visible on the packing!
if yes:
h immediately complain at the deliverer. Let the claim be confirmed in writing and
imme-
diately contact the substitution of Baumüller Nürnberg GmbH, which is in charge for
your c
ompany.
CAUTION
The following may occur, if you d
o not observe this caution information:
m property damage.
The hazard is: elect
rostatic discharge. If you expose the plug-in module, especially the elec-
tronic parts, to electrical discharges by touching
with your hand, it can sustain damage or can
completely be destroyed.
refer to the instructions and notes referring to th
e working with electrostatically sensitive parts,
when working with the plug-in module.