To Next PageTo Next Page
Need help?Do you have a question about the Beacon MEGA and is the answer not in the manual?
Details on arranging and assembling mounting boxes for alarm panels in rough-in configurations.
Instructions for preparing a wall opening and mounting the rough-in assembly for the alarm panel.
Details conductor requirements and routing for various connections like sensors, networks, and signals.
Wiring schematic for the power supply module, showing connections for power and data.
Wiring schematic illustrating the connection between a sensor module and a digital display module.
Wiring schematic for using digital display modules as master alarms, requiring specific sensor configurations.
Wiring schematic for the multi-signal alarm module, showing connections for multiple dry-contact inputs.
Wiring schematic for the computer interface relay module, detailing its connection to building computers.
Wiring schematic for the MEGA network, detailing connections for monitoring systems and personal computers.
Instructions for completing the installation of the power supply module, including wiring and mounting.
Steps for finishing the installation of the digital display module, including connections and mounting.
Instructions for completing the installation of the sensor module, including connection and mounting.
Steps for finishing the installation of the multi-signal alarm module, including connections and mounting.
Instructions for finishing the installation of the computer interface relay module, including trim plate mounting.
Procedures for turning on power, observing module status, and performing initial checks.
General procedure to enter setup mode and configure modules.
Explains monitoring mode, pressure/vacuum level monitoring, and fault codes for digital display modules.
General guidance on manual testing requiring partial disassembly of modules.
General| Power Source | Rechargeable lithium-ion battery |
|---|---|
| Display | LCD with backlight |
| Gases Detected | Carbon Monoxide, Hydrogen Sulfide, Oxygen |
| Sensor Type | Electrochemical |
| Battery Life | Up to 24 hours |
| Operating Temperature | -20°C to 50°C |
| Range | Combustible gases: 0-100% LEL |
| Alarms | Visual, Audible, Vibration |
| Communication | Bluetooth |
| Protection Rating | ATEX, IECEx |
