Configuring Your Router
QoS – Port Shaping
BEC 8920AC User Manual
QoS Port Shaping
QoS port shaping supports traffic shaping of Ethernet interfaces. It forcefully maximizes the
throughput of the Ethernet interface. When “Shaping Rate” is set to “-1”, no shaping will be in place
and the “Burst Size” is to be ignored.
Interface: P1-P4. P4 used as EWAN also covered.
Type: All LAN when P4 is LAN port; P4 used as EWAN, type WAN and all others LAN.
QoS Shaping Rate (Kbps): Set the forcefully maximum rate.
Burst Size (Bytes): Set the forcefully Burst Size.
To Next Page
Loading...
