Configuring Your Router
Wireless 5G(wl0) & 2.4G(wl1) – Security
BEC 8920AC User Manual
Security
Wireless security prevents unauthorized access or damage to computers using wireless network.
WPS Setup
The Wi-Fi Protected Setup (WPS) is designed to simplify configuration process of connecting to a
wireless network. With the WPS enabled, network must use either WPA (stronger security) or WEP
OPEN (no security) wireless authentication method.
WPS: Enable to activate this feature. For detailed configuration, please refer to WPS Configuration
Setup section.
Manual Setup AP
Select SSID: select the SSID you want these settings apply to.
Network Authentication
Open / WEP Enabled
WEP Encryption: Select to enable or disable WEP Encryption. Here select Enable.
Encryption Strength: Select the strength, 128-bit or 64-bit.
Current Network Key: Select the one to be the current network key. Please refer to key 1- 4 below.
Network Key (1~4): Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys.
Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys.
To Next Page
Loading...
