Configuring Your Router
LAN ā Ethernet
BEC 8920AC User Manual
Configuration
LAN - Local Area Network
A Local Area Network (LAN) is a shared communication system network where many computers are
connected. This type of network is area defined and is usually limited to a confined region within a
building.
Ethernet
Parameters
Group Name: This refers to the group you set in Interface Grouping section; you can set the
parameters for the specific group. Select the group via the drop-down box. For more information
please refer to Interface Grouping of this manual.
IP address: the IP address of the router. Default is 192.168.1.254.
Subnet Mask: the default Subnet mask on the router.
IGMP Snooping: Enable or disable the IGMP Snooping function. Without IGMP snooping,
multicast traffic is treated in the same manner as broadcast traffic - that is, it is forwarded to all ports.
With IGMP snooping, multicast traffic of a group is only forwarded to ports that have members of
that group.ā
When enabled, you will see two modes:
To Next Page
Loading...
