Basic Installation
Information from Your ISP
BEC 8920AC User Manual
Information from Your ISP
Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind
of services are provided, such as PPPoE, Obtain an IP Address Automatically, Fixed IP address.
Gather the information as illustrated in the following table and keep it for reference.
VPI/VCI, VC / LLC-based multiplexing, Username,
Password, Service Name, and Domain Name System
(DNS) IP address (it can be automatically assigned by your
ISP when you connect or be set manually)
VPI/VCI, VC / LLC-based multiplexing, Username,
Password and Domain Name System (DNS) IP address (it
can be automatically assigned by your ISP when you
connect or be set manually)
Obtain an IP Address
Automatically
DHCP Client (it can be automatically assigned by your ISP
when you connect or be set manually).
IP address, Subnet mask, Gateway address, and Domain
Name System (DNS) IP address (it is fixed IP address).
VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode
To Next Page
Loading...
