127
Sun protection
Drives
3. Moving the shading solution
into the locking mechanism
using the master transmitter
Run the shading solution up into the
locking mechanism until the drive
switches off automatically.
Click
4. Programming the unlocking
limit position using the master
transmitter
Run the shading solution down until
the locking mechanism clicks .
Then press the programming button
and the EXTEND button until the drive
clicks once
.
5. Deleting the limit positions
using the master transmitter
Press the programming button and
the STOP button until the drive clicks
twice after 10 seconds.
1x click
2x click
To Next Page
Loading...
Need help?
General