Becker M User Manual

141
Sun protection Control units
2. Setting the sun threshold
Remove the labelling field on the
back of the SWC441-II hand-held
radio transmitter. Use the tool
provided to turn the sun threshold
regulator to the desired setting.
The sun threshold has 15 possible
settings (approx. 2 klux to 100 klux).
When slowly turning the regulator,
the shading solution shifts to indi-
cate the setting changes.
3. Setting the wind threshold
Use the tool provided to turn the
wind threshold regulator to the de-
sired setting.
The wind threshold has 11 possible
settings (approx. 2m/s to 22 m/s).
When slowly turning the regulator,
the shading solution shifts to indi-
cate the setting changes.
4. Checking settings
After the threshold values are set, the
system switches to the TEST mode
automatically. In TEST mode, the
shade function and wind monitoring
times are shortened. The functions
can be checked in automatic mode.
End the test mode by using the slide
switch to move from automatic mode
to manual mode and back to auto
-
matic mode. If the slide switch is not
operated within 15 minutes, the test
mode is ended automatically.
Manual mode Automatic mode

Becker M Specifications

General

Brand	Becker
Model	M
Category	DC Drives
Language	English