Becker M User Manual

143
Sun protection Control units
3. Setting the sun threshold
Remove the labelling field on the
back of the SWC441-II hand-held ra-
dio transmitter. Use the tool provided
to turn the sun threshold regulator to
the desired setting.
The sun threshold has 15 possible
settings (approx. 2 klux to 100 klux).
When slowly turning the regulator,
the tubular drive clicks to indicate
the setting changes.
4. Setting the wind threshold
Use the tool provided to turn the wind
threshold regulator to the desired
setting.
The wind threshold has 11 possible
settings (approx. 2m/s to 22 m/s).
When slowly turning the regulator,
the tubular drive clicks to indicate
the setting changes.
5. Checking settings
After the threshold values are set, the
system switches to the TEST mode
automatically. In TEST mode, the
shade function and wind monitoring
times are shortened. The functions
can be checked in automatic mode.
End the test mode by using the slide
switch on the SWC441-II to move
from automatic mode to manual
mode and back to automatic mode.
If the slide switch is not operated
within 15 minutes, the test mode is
ended automatically.
Manual mode Automatic mode

Becker M Specifications

General

Brand	Becker
Model	M
Category	DC Drives
Language	English