2
Preface
Using the installation manual
The installation manual describes the commissioning of Becker tubular drives for
roller shutters and sun protection systems as well as the commissioning of specific
Becker control units.
This manual is intended for technicians who have been trained by Becker-Antriebe
GmbH.
It is essential that you follow the safety instructions for the installation and commissioning
of tubular drives and control units on pages 160-161 at the end of the installation manual.
Failure to observe these instructions can lead to serious injuries.
The installation manual does not replace the Assembly and Operating Instructions
supplied with Becker products.
Always observe the information in the installation manual as well as the Assembly
and Operating Instructions supplied with the product when operating or repairing
the system. Becker-Antriebe does not accept liability for damage or injury resulting
from improper use.
Subject to technical changes without notice.
To Next Page
Loading...
Need help?
General