41
Roller shutter
Drives
Information
PR+ drives with electronic limit switching
detect and program the limit positions
automatically if stops exist. If no stops
exist, limit switch points are programmed.
In order for the drive to detect the
upper limit position correctly, a defined
stop must be present (angled strip or
mechanical stop).
Installation with anti-lifting devices
The anti-lifting device must be securely
engaged and be pressing the roller shutter
onto the window sill.
The limit positions can be set using the
programming unit or the switch on the
drive head.
Connect the wires in the connecting
cable of the drive to the wires of the
same colour in the programming unit.
To Next Page
Loading...
Need help?
General