Becker M User Manual

53
Roller shutter Drives
Setting the intermediate positions
4. Programming the intermediate
position I
Run the drive to the required interme-
diate position I and press the STOP
and DOWN buttons until the drive clicks
once.
To travel to intermediate position I,
press the DOWN button twice within
one second (double tap)
5. Programming the intermediate
position II
Run the drive to the required intermedi-
ate position II and press the STOP and
UP buttons until the drive clicks once.
To travel to intermediate position II,
press the UP button twice within one
second (double tap).
6. Deleting the intermediate po-
sition I/intermediate position II
Run the drive to the position you wish
to delete and repeat the programming
procedure (press the STOP and DOWN
buttons or STOP and UP buttons) until
the drive clicks twice.
1x click
2x click 2x click

Becker M Specifications

General

Brand	Becker
Model	M
Category	DC Drives
Language	English