71
Roller shutter
Control units
Setting the sun protection function
1. By turning the sun threshold
regulator, you can adjust the the sun
threshold setting with the aid of the
indicator lamp.
LED green
Sun protection
function is
executed
LED red
Sun protection
function is not
executed
LED flashes
yellow, rotary
switch at
position 0
Sun protection
function is off
LED green
Twilight
function is not
executed
LED red
Below
threshold
Twilight
function is
executed
LED flashes
yellow
Rotary switch
at position 0
Twilight func-
tion switched
off
Setting the twilight function
2. By turning the twilight threshold
regulator, you can adjust the the
twilight threshold setting with the aid
of the indicator lamp.
Manual/auto button
You can switch the automatic commands
(sun protection and twilight function) on/
off by pressing the manual-auto button.
Glass breakage function
Press the button until the LED indica-
tor lights up green. The glass breakage
function is now active. Press the button
again to deactivate the glass breakage
function. The LED indicator lights up red.
Automatic off Automatic on