Foreword
EP31xx10 Version: 2.4
Firm and hardware version
The documentation refers to the firm and hardware status that was valid at the time it was prepared.
The properties of the modules are subject to continuous development and improvement. Modules having
earlier production statuses cannot have the same properties as modules with the latest status. Existing
properties, however, are always retained and are not changed, so that these modules can always be
replaced by new ones.
The firmware and hardware version (delivery state) can be found in the batch number (D number) printed at
the side of the EtherCAT Box.
Syntax of the batch number (D number)
D: WW YY FF HH Example with D No. 29 10 02 01:
WW - week of production (calendar week) 29 - week of production 29
YY - year of production 10 - year of production 2010
FF - firmware version 02 - firmware version 02
HH - hardware version 01 - hardware version 01
Beckhoff Identification Code (BIC)
The Beckhoff Identification Code contains additional information about the delivery state of the module:
General note on the introduction of the Beckhoff Identification Code (BIC) [}145].
To Next Page
Loading...
Need help?
General