Belanger INTEGRA E-1063 - Setup; Packages; Setup; Packages; Goof up; Setup; Packages; Package Value; Setup; Packages; Package Block

INTEGRA® / E-1063
1MANUL102 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 5-3
Chapter 5 Operator Interface/Wash Setup Screens
Setup
Setup / Packages
Setup / Packages / Goof Up
Setup / Packages / Package Value
Setup / Packages / Package Block
Screen Key:
• When an Oval is filled, that item becomes part of the Goof
Up Package.
• Touch the desired oval to toggle between filled and unfilled.
• VFD Mode 1 – Network VFD Dryer switch to set distance
for Package.
• VFD Mode 2– Network VFD Dryer switched OFF for
Package.
• VFD Mode 3– Network Pump 1 selected for Package.
Screen Key:
• On this screen you will enter the value/costs of each
Package.
• To make a change, touch the desired Value and
enter new Value in the “Pop-Up Number Pad”.
Screen Key:
• Package is DISABLED when the oval on the right is
filled.
• Touching the oval next to the associated Package
will toggle it between filled and unfilled.