INTEGRA® / E-1063
1MANUL102 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 6-3
Chapter 6 Techniques in Wash Setup
Recommended Initial Settings
Unattended, Rear Tire Push with Treadle
E-1063 Loading Screen E-1063 P.O.S. Screen
Dollie Up Count
Direct Select Inputs
*
Front Auto Dollie Off
03F = Wash In Use
*
Rear Auto Dollie On
Screen / Alt. Accept
01 = Auto Front Dollie
Alt Accept Is Input
02 = Auto Back Dollie
02 = Dollie Call Dollies
EZ – Load Photo Input Is
Used In Tire Eval
.5 = Minimum Time Between Tires
Use Minimum Time Between Tires
*
288 = Max Car Length
= Selection that MUST be set to match
for this type of vehicle loading
Repeat Size Dollie Enabled
*
Disable – Front Pull No Treadle
*
Disable – Rear Push No Treadle
*
Auto Size Dollie Disabled
100 = Neutral Distance
To Next Page
Loading...
