INTEGRA® / E-1063
6-4 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL102
Chapter 6 Techniques in Wash Setup
Recommended Initial Settings
Attended, Front Tire Pull with Treadle
E-1063 Loading Screen E-1063 P.O.S. Screen
Dollie Up Count
Binary Select Inputs
*
Front Auto Dollie On
*
Screen Accept ONLY
*
Rear Auto Dollie On
01 = Auto Front Dollie
EZ – Load Photo Input Is
Not Used In Tire Eval
02 = Auto Back Dollie
01 = Dollie Call Dollies
*
50 = Minimum Inches Between Tires
= Selection that MUST be set to match for
this type of vehicle loading
Use Minimum Distance Between Tires
288 = Max Car Length
Repeat Size Dollie Enabled
*
Disable – Front Pull No Treadle
*
Disable – Rear Push No Treadle
*
Auto Size Dollie Disabled
Attended, Rear Tire Push with Treadle
E-1063 Loading Screen E-1063 P.O.S. Screen
Dollie Up Count
Binary Select Inputs
*
Front Auto Dollie Off
*
Screen Accept ONLY
*
Rear Auto Dollie On
01 = Auto Front Dollie
EZ – Load Photo Input Is
Not Used In Tire Eval
02 = Auto Back Dollie
01 = Dollie Call Dollies
.5 = Minimum Time Between Tires
*
Use Minimum Time Between Tires
= Selection that MUST be set to match for
this type of vehicle loading
Repeat Size Dollie Enabled
*
Disable – Front Pull No Treadle
*
Disable – Rear Push No Treadle
*
Auto Size Dollie Disabled
To Next Page
Loading...
